USDA REAP
    Renewable Energy · Iowa · 2025

    USDA REAP Feasibility Study: 1.2 MW Rooftop Solar Array, Agricultural Operator, Story County, Iowa

    UnionMetric prepared this USDA REAP feasibility study for a regional agricultural bank approved for USDA REAP reviewing a financing request. The mandate scope and analytical conclusions are summarized below.


    The Mandate

    An agricultural producer engaged UnionMetric to prepare a third-party feasibility study supporting a USDA REAP financing request for a project located in Story County, Iowa. Total project capitalization fell within the $10 million to $25 million band. The capital provider, a regional agricultural bank approved for USDA REAP, required documentation consistent with current USDA REAP program review standards. The analytical question put to the team: whether projected energy production and incentive capture were technically supported and economically viable.

    Engagement Scope

    • Primary market area defined as a 10-mile radius
    • Comparable supply set of 27 properties
    • Demand model framework: population and income screen
    • Financial projection horizon: five-year
    • Site inspection completed; operator interviews where applicable
    • Documentation aligned to USDA REAP review standards

    Methodology Applied

    Primary Market Area

    The PMA was defined as a 10-mile radius from the subject site, calibrated to the demand catchment behavior typical of renewable energy assets in Iowa. The boundary captured the population, employment, and competitive supply base relevant to the subject's operating thesis.

    Supply and Demand Reconciliation

    The comparable supply set comprised 27 properties operating within the PMA or in directly substitutable submarkets. Demand was modeled using a population and income screen approach over a five-year horizon. The reconciliation tested whether incremental supply, including the subject, could be absorbed within the projection window without compromising stabilized occupancy assumptions.

    Capture Rate Calibration

    The subject's capture rate was calibrated against the absorption capacity of the PMA. The analysis concluded that PMA absorption capacity exceeded subject build-out by a factor of 3.5x across the projection window, with a stabilized capture rate of 3.2 percent.

    Exhibit 1: Comparable Supply Set, Iowa PMA
    [Table or chart rendered in delivered report.]
    Exhibit 2: Demand Projection Summary, five-year Horizon
    [Table or chart rendered in delivered report.]
    Exhibit 3: Subject Capture Rate vs. PMA Absorption Capacity
    [Table or chart rendered in delivered report.]

    Analytical Conclusions

    • Engineering production estimates support the projected annual generation within standard variance bands.
    • Federal and state incentive capture is documented and reconciled to the project pro forma.
    • Equipment specifications and warranty terms are consistent with industry standards for the proposed installation.
    • Operating and maintenance assumptions reconcile to comparable installation benchmarks.

    Deliverable

    The delivered report ran 156 pages with 37 exhibits across nine analytical sections, plus appendices documenting comparable supply data, demographic inputs, and financial projection assumptions. The document was prepared to the documentation standards of a regional agricultural bank approved for USDA REAP reviewing under USDA REAP program requirements.

    Browse related work: USDA REAP engagements · Renewable Energy engagements · Iowa engagements

    Related Engagements

    USDA REAPRenewable Energy

    Dairy Operation Anaerobic Digester, Lancaster County, Pennsylvania

    USDA REAP feasibility study supporting a renewable energy project in Lancaster County.

    Pennsylvania | 2025
    SBA 504Brewery & Distillery

    Ground-Up Taproom-Focused Craft Microbrewery, Growing Suburb

    SBA 504 feasibility study supporting a brewery & distillery project in Growing Suburb.

    Texas | 2026
    SBA 7(a)Brewery & Distillery

    SBA 7(a) Craft Distillery with Tasting Room and Phased Product Ramp

    SBA 7(a) feasibility study supporting a brewery & distillery project in Growing Tourism Market.

    Tennessee | 2026

    Engage UnionMetric for a USDA REAP feasibility study.

    Request a Consultation