Brewery & Distillery Feasibility Study

    Independent market and financial feasibility analysis for breweries, taprooms, brewpubs and craft distilleries financed through SBA, USDA and conventional programs, with a USPAP appraisal available from the same MAI-led team.

    By Robert Mitchell, MAI, SRA, AI-GRS, Founder & Principal Appraiser · Last reviewed October 20, 2026

    Request a Consultation

    What a brewery or distillery feasibility study decides

    Whether the local market can support the taproom or tasting room the project depends on, what the production side earns once it is sold through each channel, and whether the combined cash flow carries the debt, including, for a distillery, the years before aged spirits can be sold. SBA does not require a feasibility study on every loan; under 13 CFR 120.160(b) it may require one, and lenders and CDCs commonly ask for one on start-ups, construction and expansions. USDA requires one for B&I guaranteed loans over $1 million to a new business.

    What Is a Brewery & Distillery Feasibility Study?

    The craft beverage industry is in a multi-year correction, and where it is contracting tells a lender where the risk sits. The Brewers Association counted 9,578 operating U.S. craft breweries at the end of 2025, a 2.9 percent net decline, with 300 openings against 481 closings. Craft production fell 4 percent to about 22.0 million barrels on the Association's May 2026 revision, and craft beer retail sales were $28.0 billion, down 2.8 percent. Its midyear 2026 estimates point to another 4 percent volume decline and 9,344 breweries. Spirits show the same pattern: the American Craft Spirits Association counted 2,131 active craft distillers in August 2026, down 6.6 percent, and craft spirits sales fell 3.7 percent to $7.3 billion in 2025, the category's third consecutive annual decline and the first year in which distillery closures outpaced openings. The broader spirits industry is far larger: the Distilled Spirits Council estimates $250 billion in annual economic activity and reported $36.4 billion in supplier sales in 2025, down 2.2 percent.

    The more important signal is which models held up. On-site hospitality models declined least: brewpubs fell 1.7 percent, taprooms 3.9 percent and regional breweries 4.1 percent, while microbreweries, which sell most of their beer off-site, fell 8.9 percent. Taprooms (3,784) and brewpubs (3,525) were about 76 percent of craft breweries at the end of 2025, yet the Brewers Association puts on-site models at roughly 15 percent of craft volume (2024). Craft is 13.4 percent of U.S. beer volume but 24.8 percent of beer retail dollars, because on-premise sales return the full retail dollar. In the Association's 2023 financial benchmarking, beer sold direct to consumers averaged about $1,276 per barrel against about $602 per barrel for distributed beer. Distilleries show the same pattern: 26 percent of craft spirits sales now happen at the distillery, up from 14 percent in 2015 (ACSA). A project financed on the assumption of distribution growth is exposed to a contracting channel, while one anchored in local hospitality demand rests on firmer ground. Sorting one from the other is what a feasibility study is built to do.

    A brewery or distillery is one of the more complex assets a lender will finance. It combines a capital-intensive production operation, often with substantial specialized equipment, with a hospitality business in the taproom or tasting room, and in many cases a food or events component as well. Each revenue stream has a different margin profile, a different demand driver, and a different risk. The collateral is heavily equipment-weighted and special-use, and for distilleries there is the additional complication of aging inventory, since whiskey and other barrel-aged spirits can take years to reach sale, creating a working-capital gap that a naive projection ignores.

    SBA does not require a feasibility study on every brewery or distillery loan; 13 CFR 120.160(b) allows SBA to require one, and lenders and CDCs commonly ask for an independent study on start-ups, construction and expansions because repayment depends on projected cash flow. The study has to test the realism of the revenue mix, especially the split between higher-margin on-premise sales and lower-margin distribution, confirm that local demand supports the taproom or tasting room projections, and show that the combined cash flow covers the proposed debt. A study and an appraisal answer different questions, and because Robert Mitchell, MAI, SRA, AI-GRS, is a certified appraiser, UnionMetric can deliver either or both.

    The 2026 craft beverage market in numbers

    Beer and spirits data come from different sources and different years, so each figure names its source and date.

    MeasureFigureSource and date
    U.S. craft breweries9,578, down 2.9%; 9,344 at midyear 2026Brewers Association, December 2025 and June 2026
    Openings and closings300 openings; 481 closings (2024: 518 and 591)Brewers Association, 2025
    Craft production22.0 million barrels, down 4%; midyear 2026 estimate down 4%Brewers Association, revised May 2026; midyear report July 2026
    Craft retail sales$28.0 billion, down 2.8%; 24.8% of beer retail dollars on 13.4% of volumeBrewers Association, 2025
    Volume change by modelBrewpubs -1.7%; taprooms -3.9%; regionals -4.1%; microbreweries -8.9%Brewers Association, 2025
    Revenue per barrelDirect to consumer about $1,276; distributed about $602Brewers Association financial benchmarking, 2023 data, as reported by Brewbound
    Texas craft breweries420 (6th nationally); 1.9 per 100,000 adults 21+ (48th); 1.42 million barrels (3rd)Brewers Association state statistics, 2025
    Craft distillers2,131, down 6.6%American Craft Spirits Association, August 2026
    Craft spirits sales$7.3 billion, down 3.7%; 11.7 million cases, down 8%American Craft Spirits Association, 2025
    Sold at the distillery26% of craft spirits sales (14% in 2015)American Craft Spirits Association, 2025
    U.S. spirits supplier sales$36.4 billion, down 2.2%; spirits-based ready-to-drink cocktails up 16.4%Distilled Spirits Council, 2025
    Tax share of a spirits bottleMore than 52%Distilled Spirits Council

    How we analyze a craft beverage market

    A credible craft beverage study works from the local market and the revenue model, not from production capacity alone. We assess the trade-area population, demographics, tourism and visitation patterns, and the density of comparable venues to estimate realistic taproom or tasting-room traffic and spend. Because the resilient revenue is on-premise, this analysis is central rather than secondary. We document competing breweries, distilleries, taprooms, and adjacent on-premise venues in the trade area, along with their formats, capacity, and positioning, and we weigh the saturation of the local craft beverage scene against the demand it draws. Where a project plans wholesale distribution, we test those volumes against a channel that is contracting nationally, against shelf-space and retailer rationalization, and against the producer's distribution agreements, rather than accepting a distribution ramp as a given. We compare planned production capacity, in barrels or proof gallons, against the realistic combined demand from on-premise, distribution, and any contract or co-packing work, so the equipment is sized to the market rather than the other way around. We model the blend of taproom, distribution, food, events, and ready-to-drink revenue, and for barrel-aged spirits we account explicitly for the lag between production and saleable inventory.

    We model each project on the economics of its concept. Production breweries and distilleries built around distribution, taproom-focused breweries, brewpubs with full food service, distilleries with tasting rooms and tour programs, and hybrid sites that add an events or private-hire component all carry different capital requirements, margin profiles, and demand drivers. Increasingly, producers are diversifying into ready-to-drink cocktails, hard seltzers, and non-alcoholic options to broaden their market, and where a project includes that diversification we reflect it in both the revenue and the production analysis. For agriculturally linked distilleries that source local grain, the farm connection can open specific financing pathways and is treated as part of the project's story rather than an afterthought. In every case the analytical question is the same: can this combination of production and hospitality, in this market, generate cash flow that supports the proposed debt.

    Lenders reviewing a brewery or distillery credit look for a recognizable set of indicators, and our studies report each one explicitly with the assumptions behind it. On the revenue side we separate on-premise taproom or tasting-room sales, with their stronger margins, from wholesale distribution revenue, and we add food, events, and ready-to-drink income where applicable, building each from its own demand driver. We model production volume against capacity utilization and against saleable demand, not simply against what the equipment can produce. On the cost side we work through cost of goods including ingredients and packaging, federal and state excise taxes, production and hospitality labor, and occupancy to reach a stabilized net operating income. Against that NOI we test the debt service coverage ratio under the proposed terms and identify the breakeven volume and revenue the operation must reach to cover its debt. For distilleries we incorporate the aging and working-capital dynamics of barrel-aged inventory, and across both we present sensitivity scenarios around taproom traffic, distribution volume, and revenue mix, with an explicit ramp-up for new operations.

    SBA, USDA and conventional financing for breweries and distilleries: what the rules require and what lenders choose

    Some requirements are set by rule and some are the lender's or CDC's credit decision. The study should be clear about which is which.

    ProgramWhat it fitsKey rules
    SBA 504Owner-occupied building purchase or construction and long-life equipmentBorrower contribution 10% for an existing business, 15% for a new business, 20% if also special purpose (13 CFR 120.910); borrower occupies 51% of an existing building or 60% of new construction; debenture up to $5 million; no working capital
    SBA 7(a)Leasehold build-out, equipment, working capital, acquisitionsUp to $5 million; at least 10% equity injection for start-ups and changes of ownership; SOP 50 10 8.1 coverage tests apply to acquisitions
    USDA B&IRural breweries and distilleries, larger projectsRural area outside any city or town of more than 50,000 and its contiguous urbanized area; 85% guarantee under $5 million, 80% from $5 million to $25 million; study required for loans over $1 million to a new business (7 CFR 5001.306)
    USDA REAPEnergy efficiency and on-site renewable energyFinal rule effective October 16, 2026
    ConventionalLarger, non-owner-occupied or investor-led projectsLender policy governs

    Is a study required?

    SBA does not require a feasibility study on every loan. Its regulation says SBA may require one (13 CFR 120.160(b)), and in practice most lenders and certified development companies ask for an independent study on brewery and distillery start-ups, construction and expansions, because the loan is repaid from projected cash flow. USDA is different: a study is required for B&I guaranteed loans over $1 million to a new business (7 CFR 5001.306). SBA loans that receive a loan number on or after October 1, 2026 are governed by SOP 50 10 8.1.

    Eligibility and size

    Breweries, distilleries, brewpubs and taprooms are eligible SBA businesses within the size standards in 13 CFR 121.201: 1,250 employees for breweries (NAICS 312120), 1,100 for distilleries (312140) and $9.0 million in average annual receipts for drinking places (722410). SBA proposed revisions to its size standards in August 2026 that are not final. When the real estate is held in a separate entity, it must qualify as an eligible passive company leasing to the operating company (13 CFR 120.110(c)).

    Is a brewery or distillery special-purpose property?

    SBA's published examples of limited or special-purpose property include wineries but not breweries or distilleries, and the list is not exhaustive. A CDC or SBA can therefore classify a heavily built-out brewing or distilling plant as special purpose case by case. If it does, the borrower contribution rises from 10 percent to 15 percent, or 20 percent for a new business, and the appraisal must be a going-concern appraisal by a state Certified General appraiser with at least four going-concern appraisals of equivalent special-use property in the past 36 months, allocating value among land, building, equipment and intangibles. We ask the CDC for its classification in writing before the capital stack is fixed.

    Coverage, equipment collateral and acquisitions

    Under SOP 50 10 8.1, most acquisitions are tested at 1.25x debt service coverage on historical earnings (1.15x for expansion acquisitions), changes of ownership require a Qualified Source business valuation, and a quality-of-earnings review applies at a business purchase price of $3 million or more excluding real estate. Brewhouse, still and packaging equipment is collateral with a thin resale market, so we show equipment at orderly-liquidation assumptions rather than cost, and we show aging spirits inventory separately from finished goods.

    Environmental screening

    SBA's list of environmentally sensitive industries includes beverage manufacturing (NAICS 312) except breweries. A distillery or winery borrower therefore starts its environmental review with a Phase I report, while a brewery does not on its NAICS code alone, although prior uses of the site can still require one. Process wastewater from breweries and distilleries commonly brings municipal pretreatment permits and high-strength surcharges, which we carry as an operating cost and a capital contingency.

    USDA programs

    USDA Business and Industry guarantees serve breweries and distilleries in rural areas. The Rural Energy for America Program funds energy efficiency and on-site renewable energy. Value-Added Producer Grants fit only when the applicant produces the majority of the raw agricultural commodity, such as a farm distillery using its own grain; the FY2026 application window closed April 22, 2026.

    Hemp and cannabis products

    SBA treats a business that grows, processes or sells marijuana as ineligible, even where state law allows it, and requires lenders to document that hemp or CBD products are federally legal. The federal hemp definition narrows to 0.4 milligrams of total THC per container on December 11, 2026, after a delay from November 12, so a taproom or distillery selling hemp-derived THC drinks should plan to remove them unless Congress changes the law.

    What a brewery and distillery feasibility study includes

    A brewery and distillery feasibility study is a forward-looking analysis of whether a proposed or repositioned craft beverage operation can sell enough volume through the right channels, at the margins those channels produce, to support its investment and its debt. It is a consulting assignment and contains no opinion of value. An appraisal is a USPAP-governed opinion of market value signed by a state-certified general appraiser, and a borrower's business plan is an advocacy document. SBA may require a study, lenders and CDCs commonly request one for start-ups, build-outs, expansions and changes of ownership, and in a craft market that has been contracting, a candid demand and saturation analysis is the part that matters most.

    Trade-area and craft demand analysis

    A craft brewery or distillery draws from a local trade area and, for a compelling taproom or tasting room, a destination and tourism radius beyond it. The study sizes the local craft-drinking demographic, adds the destination draw and tests the market for saturation by comparing breweries and distilleries per capita with the regional benchmark. Texas shows why the local test matters: the Brewers Association counted 420 craft breweries in Texas in 2025, sixth nationally, yet only 1.9 per 100,000 adults 21 and older, 48th per capita, so density varies widely between metros. Craft beer volume and craft spirits sales are both declining nationally, so a credible study does not assume growth. It locates the project in the most resilient part of the sector, the taproom and tasting-room model, and tests the demand it assumes against the existing supply.

    Production capacity and barrel or proof-gallon modeling

    A brewery is sized in barrels and a distillery in proof gallons, and the study models production as a ramp rather than at nameplate capacity. No public data set reports brewery ramp-up curves, so we treat the ramp as a stated assumption tied to the taproom's seat count and hours, the state's direct-sale limits and the distribution plan, and we show volume year by year because production drives every downstream number. Modeling a craft operation at full capacity from opening overstates both revenue and the speed to break-even.

    Channel revenue mix and revenue-per-barrel modeling

    This is the analytical core of a craft beverage study, because the same volume earns several times as much through one channel as another. In the Brewers Association's 2023 financial benchmarking, beer sold direct to consumers averaged about $1,276 per barrel against about $602 per barrel for distributed beer. The study models the channel mix explicitly, taproom or tasting room, self-distribution, wholesale through the three-tier system and packaging, builds a revenue per barrel or per proof gallon for each, and blends them by the mix. Self-distribution typically falls between the two, and we price it from the subject's own account list. For a small craft producer, direct-to-consumer is the profit engine and distribution is volume at thin margin, so the channel mix, not the headline capacity, governs the economics.

    ChannelRelative revenue per unitRole
    Taproom or tasting room (direct to consumer)Highest (full retail)The profit engine for small craft
    Self-distributionMiddleLocal volume at better margin than wholesale
    Wholesale through three-tierLowest (distributor and retailer take margin)Volume at thin margin

    Cost structure and excise tax analysis

    The study models the cost structure and the excise craft beverages carry. Federal excise on beer is $3.50 per barrel on a domestic brewer's first 60,000 barrels when it produces no more than 2 million barrels a year, then $16 per barrel up to 6 million barrels, with $18 the general rate (Alcohol and Tobacco Tax and Trade Bureau; made permanent in 2020). Spirits carry $2.70 per proof gallon on the first 100,000 proof gallons removed each calendar year, $13.34 up to 22.23 million, and $13.50 above, paid as product is withdrawn from bond, so barrels aging in a bonded warehouse are not yet taxed. The Distilled Spirits Council estimates that taxes and fees account for more than 52 percent of the price of a typical bottle of spirits. For a taproom or tasting-room model, labor and occupancy are the dominant operating costs because hospitality is staffing-intensive, even as it produces the highest revenue per unit. The study builds ingredient cost, excise and the operating structure into the margin.

    The distillery aging and working-capital analysis

    A distillery faces a challenge no brewery does, and the study models it directly. Whiskey must age in barrels for years before it can be sold, tying up the capital spent to make it while rent, labor and debt service run from day one. The study sizes a separate working-capital reserve from the distillery's own barrel-entry schedule and release age, carrying operating costs, barrel and warehouse costs and debt service until aged product is sold, and it tests a phased product plan in which unaged spirits such as vodka and gin, tasting-room cocktails and any contract or sourced product bridge the gap. The tasting room matters: 26 percent of craft spirits sales now happen at the distillery (ACSA). The adequacy of the aging reserve is the central feasibility question for a whiskey program because the reserve, not the still, determines whether the business reaches the date its aged product is on the market.

    Break-even volume analysis

    The study computes the break-even volume, the barrels or proof gallons at which revenue covers operating expense and debt service, by dividing the fixed cost by the contribution per unit at the blended channel revenue. It tests the break-even against the production capacity and shows the year in the ramp at which the operation crosses it. For a distillery, the break-even is read alongside the aging analysis, since the volume threshold means little if the operation cannot fund itself to reach the point where its aged product is on the market. As an illustration only, a taproom brewery with $600,000 a year of fixed costs and debt service that earns $400 of contribution per barrel needs about 1,500 barrels a year to break even; the same fixed costs at a distributed-beer contribution of $150 per barrel need about 4,000 barrels. The study calculates this for the actual project and the actual channel mix.

    Competitive and saturation analysis

    The study inventories the competing breweries or distilleries in the trade area, their size, channels and positioning, and assesses the market for saturation. Craft closures have recently outpaced openings: 481 closings against 300 openings among breweries in 2025, and, for the first time, more distillery closures than openings in the year to August 2026. The study therefore tests the demand the project assumes against the existing supply rather than assuming it takes its share uncontested. It also accounts for the broadening substitute set: spirits-based ready-to-drink cocktails (up 16.4 percent in 2025 per the Distilled Spirits Council), non-alcoholic beer (Athletic Brewing ranked sixth among U.S. craft brewers in 2025), and hemp-derived THC drinks, which lose federal hemp status on December 11, 2026 unless Congress acts, with state-licensed cannabis beverages a local substitute where legal.

    Valuation and the going-concern appraisal

    A craft brand's value lives substantially in its brand, distribution and cash flow, not only in its building, so we frame value as a going concern. Where the CDC or lender treats the property as special purpose, SBA's going-concern appraisal rules apply, with value allocated among land, building, equipment and intangibles. UnionMetric can deliver the study and the appraisal from the same MAI-led team.

    Texas brewery and distillery rules

    Texas law allows breweries to sell beer to go for off-premise consumption (House Bill 1545, effective September 1, 2019) and lets distillers sell spirits to go, subject to volume limits and permit conditions set by the Texas Alcoholic Beverage Commission. Production caps for on-site consumer sales and per-consumer limits on distillery sales are set in the Alcoholic Beverage Code, and we confirm the current limits against the Code and the subject's permit class before modeling taproom or tasting-room revenue. A Texas brewery's license is issued by the Commission with local fees on top. The Texas Craft Brewers Guild reports that 2024 was the first recent year in which Texas brewery closures outnumbered openings, which is why the study tests local density as well as statewide demand.

    Permits, zoning, fire code and wastewater

    Federal permits come first: a brewery needs a Brewer's Notice and a distillery a Distilled Spirits Plant registration from the Alcohol and Tobacco Tax and Trade Bureau before production, with state permits following. Local rules can limit a taproom or distillery before the pro forma does: King County, Washington extended a moratorium on new or expanded wineries, breweries, distilleries and remote tasting rooms in unincorporated areas through June 2025, and cities increasingly write separate zoning definitions and event rules for taprooms. Distilleries store and process flammable liquids, and building and fire codes limit quantities per control area and can require high-hazard occupancy construction with sprinkler, ventilation and electrical upgrades, so we price code-driven construction from the architect's and fire marshal's review, not from a generic cost per square foot.

    Methodology and data sources

    The analysis follows the recognized craft beverage feasibility approach: candid trade-area and demand analysis, production capacity and ramp modeling, channel revenue mix and revenue-per-unit modeling, cost and excise analysis, the distillery aging and working-capital analysis where applicable, break-even volume, competitive and saturation analysis, and business-enterprise valuation. It is prepared under USPAP discipline and aligned with SBA SOP 50 10 8, drawing on recognized industry data from the Brewers Association, the American Craft Spirits Association, the TTB, and others for volume, channels, excise, and operating benchmarks. The result is a study a lender can underwrite from and an SBA reviewer can rely on, in a sector where the channel mix and, for distilleries, the aging period carry the risk.

    What Our Feasibility Study Covers

    Local market and on-premise taproom or tasting-room demand
    Competing breweries, distilleries and on-premise venues, including openings and closures
    Brewery and distillery density per capita against the regional benchmark
    Distribution realism testing against a contracting national channel
    Production capacity and utilization modeling in barrels or proof gallons
    Revenue per barrel or proof gallon by channel, blended by mix
    Excise tax, ingredients, labor and occupancy in the margin
    Aging working-capital reserve and phased product plan for whiskey programs
    Break-even volume, DSCR by year and sensitivity scenarios
    Zoning, permit, fire-code and wastewater review
    Optional USPAP appraisal from the same MAI-led team

    Who Needs This Study?

    SBA 504 and 7(a) lenders financing brewery or distillery projects

    USDA lenders evaluating rural and agriculturally linked craft beverage producers

    Sponsors and operators developing, expanding, or acquiring craft beverage facilities

    Investors underwriting taproom, brewpub, distillery, or hybrid concepts

    Our Process

    1

    Engagement & Scoping

    We define the project scope, identify key assumptions, and establish the analytical framework tailored to your property type and financing program.

    2

    Market Research & Data Collection

    Our team collects primary and secondary market data including demographics, competitive supply, demand drivers, and industry benchmarks.

    3

    Financial Analysis & Modeling

    We build detailed financial pro formas with revenue projections, operating expense rationalization, DSCR analysis, and sensitivity testing.

    4

    Report Delivery & Review

    You receive a comprehensive, lender-ready feasibility report with clear conclusions, supporting data, and a review call to discuss findings.

    Why Choose UnionMetric

    Institutional Quality

    Independent of the borrower and the deal, fixed-fee and not contingent on the conclusion, structured to the program the loan will use, and led by an MAI appraiser who can also sign the appraisal.

    Independent & Third-Party

    We maintain strict independence from borrowers, developers, and operators to ensure unbiased conclusions.

    Nationwide Coverage

    We serve projects across all 50 states with expertise spanning every major CRE asset class.

    Fees and turnaround

    Every engagement is quoted at a fixed fee before work starts. The fee does not depend on the conclusion or on whether the loan closes.

    EngagementTypical feeTypical timing
    Brewery or distillery market and demand study$4,500 to $7,50010 to 15 business days
    Feasibility study with pro forma, SBA 7(a), leased space$6,500 to $12,00015 to 20 business days
    Construction or ground-up feasibility study, SBA 504, USDA B&I or conventional$9,500 to $18,00020 to 25 business days
    Feasibility study plus USPAP appraisal, one MAI-led team$14,000 to $28,00025 to 35 business days
    Acquisition or expansion study, including the SOP 50 10 8.1 historical coverage test$7,500 to $14,00015 to 20 business days
    Distillery aging working-capital model$3,500 to $6,500 standalone, or $2,500 as an add-on7 to 10 business days

    What we need to start: the site address and lease or purchase terms, the brewhouse or still specification and planned barrels or proof gallons, the taproom or tasting-room plan, the distribution plan, the financing program and lender, and for an existing operation three years of financial statements, TTB reports and sales by channel.

    Frequently Asked Questions

    Request a Consultation

    Contact our team to discuss your project and receive a customized proposal with scope, timeline, and fee estimate.

    (214) 855-0355
    hello@unionmetricfeasibility.com

    How we verify this page

    Program rules on this page are checked against 13 CFR Parts 120 and 121, SBA SOP 50 10 and 7 CFR Part 5001, and every market figure names its source and date. Last verified October 20, 2026.

    DateChange
    October 20, 2026Page revised: brewery and distillery data updated to the Brewers Association's May 2026 revision and ACSA's October 2026 release; SBA and USDA section rewritten with special-purpose, environmental, hemp and eligibility rules; excise, Texas, permitting and aging working-capital sections added; unsupported figures removed.

    Sources

    1. Brewers Association, A Year of Correction for Craft Beer, With Early Signals of Recovery
    2. Brewers Association, national beer sales and production data
    3. Brewers Association, 2026 Midyear Report
    4. Brewers Association, 2025 Midyear Report
    5. Brewers Association, state craft beer statistics
    6. Brewbound, Brewers Association financial benchmarking survey
    7. American Craft Spirits Association, Craft spirits sales decline for third straight year
    8. American Craft Spirits Association, 2025 Craft Spirits Data Project
    9. Distilled Spirits Council, Annual Economic Briefing 2025
    10. Distilled Spirits Council, federal taxes and alcohol regulation policy
    11. Alcohol and Tobacco Tax and Trade Bureau, Industry Circular 2023-2 on CBMA tax rates
    12. Congressional Research Service, Alcohol Excise Taxes
    13. Tax Foundation, Distilled Spirits Taxes by State, 2026
    14. Northwest Business Development Association, lending partners and special-purpose property guidance
    15. Business Plan Firm, Does the SBA require a feasibility study?
    16. Foley Hoag, A temporary reprieve for hemp-THC products
    17. USDA Rural Development, Value-Added Producer Grants FY2026 notice
    18. Texas Alcoholic Beverage Commission, alcohol delivery and pickup
    19. Texas Craft Brewers Guild, government affairs
    20. King County, Washington, moratorium legislation on wineries, breweries and distilleries
    21. 13 CFR 120.160, loan conditions
    22. 13 CFR 120.910, borrower contributions
    23. 13 CFR Part 121, size standards
    24. SBA SOP 50 10, Lender and Development Company Loan Programs
    25. 7 CFR Part 5001, USDA guaranteed loans
    26. USDA, REAP final rule, 91 FR 62600

    Related Blog Posts

    View All
    Industry Guides

    Rationalizing the Development Budget: How a Feasibility Study Tests Project Cost Across Seven Asset Classes

    A development budget is not a number the sponsor hands the lender. It is a hypothesis about cost that a feasibility study must test against three independent standards: completeness, benchmark evidence and the value of what gets built. This is how that test is run, line by line, for the seven asset classes that dominate SBA, USDA and community-bank construction lending in 2026.

    October 21, 2026
    59 min read