USDA Feasibility · Rural Market · USDA B&I · 2026

    USDA B&I Feasibility Study: Rural RV Resort, Five-Component Analysis

    A ground-up rural RV resort financed through the USDA Business and Industry Loan Guarantee: rural eligibility, the full five-component Rural Development framework, jobs quantification, and repayment across a base and downside case.


    Engagement Snapshot

    MarketGenuinely rural, USDA-eligible market with recreation draw
    Asset typeGround-up rural RV resort and outdoor-hospitality development, owner-operated
    ProgramUSDA B&I Loan Guarantee, five-component feasibility
    Project scale~90 sites, amenities, ~$8 million project (representative)
    Rural objectiveRural employment creation and retention
    Study scopeRural eligibility, five-component analysis, demand build, jobs quantification, DSCR and debt yield, repayment analysis, base and downside sensitivity
    Standard of preparationPrepared under USPAP discipline and to USDA Rural Development program standards

    Representative engagement profile. Project parameters are illustrative of this market and program. Market figures reflect current third-party data and are sourced in the exhibit below.

    The question put to the analysis

    A sponsor proposed to develop a ground-up RV resort and outdoor-hospitality property in a rural recreation market, financed through the USDA Business and Industry Loan Guarantee Program. The lender required a feasibility study that would satisfy USDA Rural Development, and the USDA standard is broader than the property-and-repayment analysis a conventional or SBA lender expects. The question was therefore not only whether the resort would generate the cash flow to service a guaranteed loan, but whether the project satisfied the full analytical structure Rural Development reviewers apply, and whether it advanced the program's statutory purpose of creating and retaining employment in a rural community.

    A USDA feasibility study is organized around five distinct components, and the analysis was built to that architecture rather than to a generic template. The five components are economic feasibility at the national, state, and county levels; market feasibility examining current and future demand against supply; technical feasibility covering labor, infrastructure, utilities, and site; management feasibility assessing the operator's capacity; and financial feasibility presenting the pro forma, coverage, and the guaranteed-loan repayment analysis. A study that addresses only the market and the pro forma, as an SBA study largely does, is incomplete against the USDA standard, because Rural Development reviewers evaluate the economic, technical, and management components and the rural-employment objective with equal weight. This engagement profile illustrates how a feasibility study verifies rural eligibility, works through all five USDA components in sequence, quantifies the rural jobs the program exists to support, and tests the guaranteed-loan repayment across a base and downside case.

    Rural eligibility: the threshold gate

    Before any analysis of demand or cash flow, the study confirmed the project cleared the eligibility gate that governs every USDA loan.

    Eligibility factorFinding
    LocationUnincorporated rural county, outside any urbanized area
    Population testCommunity within USDA rural population limits, not adjacent to an urbanized area
    VerificationUSDA eligibility map confirmation for the specific site address
    Program fitB&I, for-profit rural business creating and retaining rural employment

    Rural eligibility is the threshold condition, and the analysis addressed it first because a project that fails it cannot be financed under the program regardless of its economic merit. The study confirmed the site sat within a genuinely rural area under the B&I definition, generally a community of limited population not adjacent to or contiguous with an urbanized area, and verified the specific address against the USDA eligibility map rather than reasoning from the county alone, since eligibility is determined at the site level. Establishing eligibility at the outset framed the entire study, because every subsequent component, the economic overview, the labor shed, the market draw, is a rural analysis, not a metropolitan one, and the rural context shapes the assumptions throughout.

    Component one: economic feasibility

    The first USDA component situates the project in its economic context at three levels, which the analysis built from the national picture down to the county.

    Economic levelContent
    NationalOutdoor-hospitality and RV-travel demand context, consumer travel trends
    StateState tourism and recreation economy, visitor spending
    CountyRural county employment base, population trend, economic diversification need

    The economic feasibility component established that the project was viable in its macroeconomic and local setting, a section an SBA study does not require in this form. At the national level the analysis set out the demand context for RV travel and outdoor hospitality; at the state level it addressed the tourism and recreation economy and visitor spending that the resort would draw on; and at the county level it examined the rural employment base, the population trend, and the economic diversification the county needed, which is where the B&I purpose comes into focus. A rural county with a narrow employment base benefits materially from a project that adds a new economic activity and new jobs, and the analysis framed the resort as economic diversification for the community, connecting the project to the program's rural-development rationale.

    Component two: market feasibility

    The second component is the demand analysis, which the analysis built with the math shown, as in any rigorous feasibility study.

    Market stepFigure
    Draw radiuswide, destination and regional recreation draw
    Demand driversrecreation attraction, RV travel growth, seasonal visitation
    Competitive supplyexisting rural parks and resorts within the draw
    Stabilized occupancymodeled by season to a stabilized annual rate
    Site nights (90 sites x 365 x occupancy)the demand basis for revenue

    The market feasibility component examined current and future demand against the competitive supply, the analytical heart the USDA framework shares with an SBA study. The analysis defined a wide draw radius appropriate to a destination recreation property, sized demand from the recreation attraction, the RV-travel trend, and the seasonal visitation pattern, and inventoried the competing rural parks and resorts within the draw. It modeled occupancy by season, since a rural resort's demand is strongly seasonal, to a stabilized annual rate, and built the site-night basis for revenue from the site count against that occupancy. The traffic-count and demographic overlays that USDA field offices evaluate were incorporated, grounding the demand in the data reviewers examine.

    Component three: technical feasibility

    The third component, distinctive to USDA, assesses whether the project can actually be built and staffed in its rural setting.

    Technical factorFinding
    Labor availabilityrural labor shed assessed for hospitality and grounds staffing
    Infrastructureroad access, proximity to services, connectivity
    Utilitieswater, sewer or septic, power, and their capacity to the site
    Site and engineeringacreage, terrain, and buildability for the site plan

    The technical feasibility component addressed the practical buildability and operability of the project, a section SBA studies do not require but Rural Development reviewers weigh heavily, precisely because rural sites can face infrastructure and labor constraints a metropolitan site would not. The analysis assessed the rural labor shed for the resort's staffing needs, since a rural project must draw its workforce from a thinner local labor market, and examined the infrastructure and the utilities, the water, the sewer or septic capacity, and the power to the site, because a rural site may require utility extensions that bear on cost and timeline. The site and engineering assessment confirmed the acreage and terrain supported the planned site count and amenities. Addressing these directly is part of what makes a study credible to a USDA reviewer, who cannot assume rural infrastructure the way an urban analysis can.

    Component four: management feasibility

    The fourth component evaluates the operator, which the analysis assessed against the demands of the asset.

    Management factorFinding
    Operator experiencehospitality and outdoor-recreation operating background
    Capacityability to execute the development and stabilize operations
    Systemsreservation, revenue-management, and operating systems

    The management feasibility component assessed whether the operator had the experience and capacity to execute the project and run it to the pro forma, a component USDA requires because a guaranteed loan's repayment depends on competent operation. The analysis evaluated the operator's hospitality and outdoor-recreation background, the capacity to carry a development through construction and lease-up to stabilized operation, and the systems the resort would use to manage reservations and revenue. A capable operator materially reduces the execution and operating risk that a rural hospitality project carries, and the analysis weighed the management factor as an explicit input to the overall feasibility rather than an afterthought.

    Component five: financial feasibility and the repayment analysis

    The fifth component presents the pro forma and the guaranteed-loan repayment analysis, built with the income approach USDA specifies.

    Financial measureFigure
    Stabilized revenuesite nights x blended rate, plus amenities and ancillary
    NOI marginmodeled to a stabilized margin for the asset
    Total project cost~$8 million (representative)
    B&I guarantee structureloan within B&I limits, guarantee percentage by loan size
    Stabilized DSCRtargets the coverage USDA and the lender expect
    Debt yieldmodeled as an occupancy-independent check

    The financial feasibility component demonstrated the project's ability to repay the guaranteed loan, applying the income approach, discounted cash flow and capitalization, that USDA guidelines specify. The analysis built the stabilized revenue from the site nights against a blended rate plus the amenity and ancillary income, modeled the operating expenses and the stabilized net operating income margin for the asset, and set the pro forma against the total project cost. The B&I guarantee structure was framed with the loan within the program's maximum and the guarantee percentage that applies by loan size, and the coverage was modeled to the debt service coverage the program and the lender expect, with a debt yield as an occupancy-independent check. The repayment analysis, the demonstration that the cash flow services the guaranteed loan through the ramp and at stabilization, was presented as the culmination of the five components rather than as a standalone pro forma.

    The rural-employment objective

    Because job creation is the statutory purpose of the B&I program, the analysis quantified it explicitly.

    Employment measureFinding
    Construction employmenttemporary jobs during development
    Permanent jobs createdfull-time and seasonal positions at stabilization
    Jobs retainedany existing positions preserved
    Rural benefitnew economic activity and payroll in the rural county

    The rural-employment quantification is a USDA-specific requirement with no SBA analog, and the analysis addressed it directly because it is central to how Rural Development evaluates a B&I project. The study estimated the permanent full-time and seasonal positions the resort would create at stabilization, the temporary construction employment during development, and any jobs retained, and connected them to the rural benefit, the new payroll and economic activity in a county that needed diversification. Quantifying the jobs is not a formality; it is a core evaluation criterion, and a study that omits it or treats it loosely misses a component the program weighs heavily.

    Coverage, sensitivity, and where the risk concentrates

    The credit was tested across a base and downside case, and the risks were addressed.

    MetricBase caseDownside (occupancy and rate soften, ramp extends, costs rise)
    Stabilized NOIbasereduced
    DSCRtargets program coveragethinner
    Debt yieldbaselower
    Multi-year projectionbasecompressed downside

    The base-case coverage met the debt service coverage the program and the lender expect, supported by the stabilized occupancy and rate. The downside case modeled the variables that matter most for a rural resort, softer occupancy and rate, a longer ramp, and higher development or utility costs, which compressed coverage and lengthened the path to stabilization. The risks concentrate in the seasonality and the demand concentration of a recreation asset, the rural labor and infrastructure constraints the technical component examined, the discretionary nature of RV travel, the startup ramp of a ground-up development, and interest-rate sensitivity, with environmental and site due diligence handled as separate borrower-obtained scopes.

    Conclusion

    The engagement reached a conditional affirmative, built on the full USDA framework rather than a market analysis alone. Rural eligibility was verified at the site level as the threshold condition, and the study worked through all five components in sequence, the economic overview at three levels, the market demand with its math, the technical assessment of labor, infrastructure, and utilities, the management evaluation, and the financial feasibility with the income-approach repayment analysis. The rural jobs the program exists to support were quantified explicitly, and the base and downside cases bracketed the outcome.

    The value of the feasibility study to a USDA lender is to satisfy the complete Rural Development standard, not a subset of it. By verifying rural eligibility, by addressing the economic, technical, and management components that distinguish USDA from SBA, by quantifying the rural employment the B&I program is designed to create, and by presenting the guaranteed-loan repayment across a base and downside case, the analysis gave the lender and the Rural Development reviewer a study built to the program's own architecture.

    Market Data Exhibit

    MetricValueNote / Source
    ProgramUSDA B&I Loan GuaranteeUSDA Rural Development
    Rural eligibilitysite-level, within B&I population limitsUSDA eligibility map
    Feasibility structurefive-component Rural Development frameworkUSDA guidelines
    Sites~90Representative
    Occupancyseasonal, to a stabilized annual rateRepresentative
    Total project cost~$8 millionRepresentative
    B&I maximum loancommonly up to $25 millionUSDA (verify current)
    Guarantee percentage~60% to 80% by loan sizeUSDA (verify current)
    Financial methodologyincome approach (DCF and capitalization)USDA guidelines
    Jobs created and retainedquantified at stabilizationRepresentative (USDA objective)
    Stabilized DSCRprogram and lender expectationRepresentative

    Pro forma figures are representative of this market and program. USDA program parameters are updated periodically; verify current B&I loan limits, guarantee percentages, rural eligibility thresholds, and feasibility requirements against USDA Rural Development before citation in a client deliverable.

    Related

    Engage Union Metric Feasibility for a USDA feasibility study.

    Request a Consultation