Industry Guides

    How Much Does a Feasibility Study Cost? SBA, USDA, and Conventional Pricing Guide

    April 2, 2026
    45 min read

    Comprehensive guide to feasibility study pricing across SBA 7(a), SBA 504, USDA B&I, USDA Community Facilities, and conventional CRE programs. Covers $5,000 to $50,000+ range by property type, turnaround times, and what is included at each price point.

    How Much Does a Feasibility Study Cost? SBA, USDA, and Conventional Pricing Guide

    For the regulation itself, section by section, see our 7 CFR Part 5001 Handbook.

    Every borrower pursuing SBA or USDA financing asks the same question before engaging a consultant: what will this feasibility study cost? The answer depends on the government program involved, the property type, the complexity of the financial modeling, and the depth of market analysis required. The U.S. commercial real estate feasibility study market spans roughly $5,000 to $50,000 or more, with SBA-compliant studies clustering at the lower end and USDA studies commanding premium pricing due to stricter federal review standards. This guide provides a transparent breakdown of current market pricing across every major program, what drives cost variation, what borrowers and lenders should expect at each price point, and how the investment compares to the capital at risk.

    SBA Feasibility Study Pricing: 7(a) and 504 Programs

    SBA 7(a) feasibility studies typically range from $5,000 to $20,000. Most standard hotel, retail, or service-business studies for 7(a) loans fall in the $6,900 to $15,000 band. The SBA does not prescribe a rigid feasibility study format in SOP 50 10 8, giving lenders and CDCs discretion on scope, which keeps costs somewhat lower than USDA equivalents. For straightforward acquisitions of established businesses with operating history, studies at the $5,000 to $8,000 level may suffice. Startup businesses, new construction, and special-purpose properties typically push costs toward the $10,000 to $20,000 range due to the depth of market validation and financial modeling required when no historical operating data exists.

    SBA 504 feasibility studies range from $6,000 to $20,000, closely mirroring 7(a) pricing because the analytical requirements overlap significantly. CDCs frequently require feasibility studies for startups, new construction, and special-purpose properties. Under 13 CFR Section 120.882, the cost of the feasibility study can potentially be financed as a 504 project soft cost, with the borrower typically paying out of pocket and receiving reimbursement from loan proceeds at closing. This financing mechanism effectively reduces the borrower's immediate cash outlay for the study, though the cost is ultimately incorporated into the loan balance.

    Hotel and Hospitality Feasibility Studies

    Hotels represent a distinct pricing category within both SBA and conventional lending. Standard SBA hotel feasibility studies run $5,000 to $15,000 from most national feasibility consulting firms. Full-service hotel market studies from specialized hospitality consulting practices, particularly those producing institutional-grade reports accepted by major lenders and franchise brands, can reach $15,000 to $50,000 or more. The price differential reflects the depth of analysis: institutional-grade hotel studies incorporate STR Host Report data with RevPAR, ADR, and occupancy benchmarking against a defined competitive set, demand generator analysis covering airports, convention centers, corporate parks, and leisure attractions, supply pipeline tracking of properties under construction or in planning, labor scheme modeling covering staffing ratios, wages, and benefits, and food and beverage revenue projections for full-service properties.

    The SBA now effectively mandates feasibility studies for hotel loans regardless of program type, reflecting the hospitality sector's elevated default risk and revenue volatility. Hotels typically require 2 to 3 years to stabilize after opening, and lenders require DSCR thresholds of 1.30x to 1.40x or higher. The feasibility study provides the only independent basis for projecting cash flow during this critical lease-up period. Franchise brand selection, which carries significant implications for both construction cost and operating performance, may require a separate brand-specific analysis at additional cost.

    USDA Feasibility Study Pricing

    USDA imposes the most prescriptive feasibility requirements of any federal lending program, and pricing reflects that rigor. USDA Business and Industry (B&I) feasibility studies range from $10,000 to $25,000 for standard projects and can reach $50,000 for complex food processing, meat processing, or industrial facilities. The USDA requires feasibility studies for all B&I guaranteed loans exceeding $1 million to new businesses under 7 CFR Part 5001, and studies must cover five mandated dimensions: economic, market, technical, financial, and management feasibility. Each dimension requires independent research and analysis, driving both the cost and timeline above SBA-only requirements.

    USDA REAP (Renewable Energy for America Program) studies for solar, wind, and energy-efficiency projects run $7,000 to $15,000, representing the simplest USDA study type with the narrowest analytical scope. USDA Community Facilities feasibility studies range from $15,000 to $30,000 and apply to hospitals, nursing homes, fire stations, daycare centers, and other essential community services in rural areas with populations of 20,000 or fewer. Higher-tier CF studies must be prepared under AICPA attestation standards with the consultant carrying professional liability insurance per Section 5001.304(b). USDA Section 9003 (biorefinery) studies command $30,000 or more with timelines of eight or more weeks, reflecting highly technical scope requirements including feedstock supply analysis, conversion technology assessment, and offtake agreement verification.

    Industry practitioners consistently warn that feasibility studies priced at $3,000 to $5,000, particularly those produced from template-driven or AI-generated methodologies, are frequently rejected by USDA field offices and the National Office for insufficient depth, inadequate independence documentation, and failure to address all five mandated feasibility dimensions with location-specific primary research. The cost floor for a USDA-compliant study that will survive agency scrutiny is generally $7,000 to $10,000 for the simplest project types.

    Conventional and Specialized Property Pricing

    Bank-required feasibility studies for conventional CRE lending span the full $5,000 to $50,000 range depending on property complexity, market depth, and the lender's internal underwriting standards. Most decision-grade studies from established firms land at $15,000 to $50,000. Unlike SBA and USDA studies that follow program-specific frameworks, conventional feasibility studies are shaped entirely by lender requirements and credit committee expectations. Construction lenders, in particular, demand rigorous absorption analysis and phased revenue modeling that can push study costs toward the upper end of the range.

    Assisted living and senior housing feasibility studies range from $5,900 to $35,000, with the wide spread driven by acuity-level modeling across assisted living, independent living, and memory care units, penetration rate analysis of the 75+ and 85+ age cohorts, NIC MAP data integration for occupancy and construction benchmarking, and Medicaid and Medicare reimbursement modeling for skilled nursing components. Market analysis for senior housing projects typically requires 45 to 60 days, with the financial feasibility component adding 2 to 3 additional weeks when conducted separately.

    Self-storage and RV/boat storage feasibility studies run $5,000 to $15,000, reflecting relatively standardized analytical frameworks centered on square footage per capita metrics, trade area saturation analysis, and drive-time competitor mapping. Gas station and convenience store studies fall in the $6,000 to $15,000 range, driven by AADT traffic count analysis from state departments of transportation, fuel volume capture rate modeling, and in-store sales projections. Multifamily feasibility studies range from $8,000 to $25,000 depending on unit count, market complexity, and whether the project involves LIHTC or other affordable housing components requiring capture rate and income qualification analysis.

    What Drives Cost Variation

    Five primary factors determine where a study falls within its price range. Project complexity is the largest driver: a straightforward retail acquisition study versus a ground-up hotel development with franchise selection can differ by three to four times in cost. Property type matters because special-purpose properties require industry-specific data subscriptions, each adding $500 to $2,000 in direct data costs. STR data is required for hotels, NIC MAP for senior housing, and Kalibrate or similar platforms for gas stations. Market size affects pricing through the depth of competitive analysis required, as a study in a major metro may need to analyze 20 or more competitors versus three to five in a rural market.

    The regulatory program imposes structural cost differences. USDA B&I studies under 7 CFR 5001 must cover five distinct feasibility dimensions with independent verification of contracts and counterparty creditworthiness, adding analytical layers not required for SBA-only studies. SBA studies, while less prescriptive in format, still require sufficient depth to satisfy lender credit committees and SBA loan authorization review. Timeline drives costs through staffing requirements: standard turnaround for SBA studies runs 7 to 16 business days, while USDA B&I studies require 4 to 6 weeks and Community Facilities studies need 5 to 7 weeks. Rush delivery in as little as 5 business days is available from some providers but carries a premium. Geographic factors also play a role, as studies requiring in-person site visits to remote or rural locations incur travel surcharges that studies in major metros do not.

    What Is Included at Each Price Point

    Pre-feasibility or short-form studies at $1,500 to $5,000 provide a brief market analysis, high-level financial projections, management team overview, and risk factor summary. These are suitable for initial screening or evaluating whether to proceed with a full study, but are generally insufficient for SBA or USDA regulatory compliance and will not satisfy credit committee requirements for government-guaranteed loans. Deliverables at this tier typically run 15 to 30 pages.

    Standard SBA and USDA feasibility studies at $5,000 to $15,000 include an executive summary with a go or no-go recommendation, market feasibility analysis with radius demographics using 5/10/15-mile rings or 15/20/25-minute drive-time isochrones, competitor inventory and analysis with occupancy rates and pricing, demand and supply equilibrium analysis with absorption rate projections, technical feasibility covering site suitability, zoning review, and environmental screening, financial feasibility with a 10-year pro forma, DCF analysis, DSCR calculations, and sensitivity analysis stress testing across 5%, 10%, and 15% income decrease scenarios, and a management assessment evaluating the borrower's operational capability and experience. Deliverables at this tier run 40 to 80 pages.

    Complex or large-scale studies at $15,000 to $50,000 or more include all standard components plus multi-scenario financial modeling with Monte Carlo simulation for high-risk projects, phased ramp-up analysis for construction and development, capital stack documentation, independent verification of supply contracts and offtake agreements, technology readiness assessment for industrial and processing projects, counterparty creditworthiness analysis, and full 7 CFR 5001 OneRD compliance documentation for USDA submissions. Community Facilities studies at this tier add community benefit analysis and economic impact assessment. Deliverables run 80 to 150 pages with multiple appendices of supporting data tables, maps, and financial exhibits.

    Turnaround Times by Study Type

    SBA feasibility studies for standard acquisitions and expansions require 7 to 16 business days from engagement to final deliverable, assuming the borrower provides all requested information promptly. Site selection analysis, which evaluates multiple potential locations without full financial modeling, can be completed in 5 to 7 business days. Rush delivery in as little as 5 business days is available from some national firms when all materials, including business plans, tax returns, operating statements, and lease agreements, are provided at engagement. USDA REAP energy studies require 3 to 4 weeks due to technical energy production modeling. USDA B&I studies require 4 to 6 weeks reflecting the five-component analytical framework. USDA Community Facilities studies need 5 to 7 weeks including community benefit analysis. USDA Section 9003 biorefinery studies require 8 or more weeks for feedstock and technology assessment.

    The timeline for lender revision requests adds 3 to 10 business days depending on the scope of revisions. Common revision triggers include credit committee requests for additional sensitivity scenarios, lender questions about competitive analysis depth, SBA or USDA field office requests for clarification on specific assumptions, and changes in project scope after the initial study draft. Borrowers should plan their loan process timeline to accommodate the feasibility study alongside the appraisal (2 to 4 weeks) and Phase I ESA (2 to 4 weeks), ideally ordering all three simultaneously during weeks two through four of the loan process to avoid sequential delays.

    Cost Comparison With Related Due Diligence Services

    Understanding feasibility study costs requires context against other due diligence items in the typical SBA or USDA loan package. Commercial real estate appraisals average approximately $2,500 nationally for standard properties, with the range spanning $2,000 to $5,000 for typical commercial buildings. MAI-designated appraisers working on complex or special-purpose properties command $4,000 to $10,000. Going-concern appraisals for hotels, gas stations, and assisted living facilities can reach $10,000 to $25,000 or more due to the component allocation requirements and the need for industry-specific appraiser competency under SBA's 4-in-36 rule.

    Phase I Environmental Site Assessments run $2,000 to $5,000 for standard commercial properties under ASTM E1527-21 standards, with complex industrial sites or properties with known environmental concerns reaching $7,500 to $15,000. Phase II ESAs, triggered when Phase I identifies recognized environmental conditions, add $10,000 to $50,000 or more for subsurface investigation. Business valuations for SBA purposes range from $2,500 to $30,000 depending on complexity, with the SBA requiring credentialed valuators (CVA, ABV, ASA, CBA, or BCA) when intangible value exceeds $250,000.

    When viewed as a total due diligence package, a typical SBA loan closing for a special-purpose property involves $15,000 to $75,000 in combined third-party costs across appraisal, feasibility study, Phase I ESA, and business valuation. For a $3 million project, this total due diligence investment of approximately 0.5% to 2.5% of project cost represents the analytical foundation on which a multi-million-dollar credit decision rests.

    The ROI Calculation: Study Cost Versus Capital at Risk

    A $10,000 feasibility study on a $3 million project represents just 0.33% of total capital at risk. Against this modest investment, the study provides independent validation that the project's economics support debt service, identifies market risks before capital is committed, satisfies regulatory requirements that enable loan approval, and creates a documented analytical foundation for credit committee review. The cost of omitting a feasibility study can far exceed the study itself: loan denials are the most direct consequence, as banks commonly reject applications lacking independent validation for high-risk projects. Mid-process identification of the need for a study adds 2 to 6 weeks of delay. Revised or supplemental studies may be required if initial submissions are deficient, compounding both cost and timeline.

    Feasibility studies remain valid for approximately 6 to 12 months, with studies most useful within 6 months of completion. Factors that shorten validity include significant economic shifts, interest rate changes, new competitive supply entering the market, regulatory or zoning changes, and material changes in project scope. For SBA 504 loans, the feasibility study cost may be recoverable as a financed project soft cost under 13 CFR Section 120.882, effectively reducing the borrower's out-of-pocket exposure to zero at closing. The general rule cited across the industry holds: the study costs approximately 1% of total project cost while potentially preventing 100% loss of the capital invested.

    How to Evaluate Feasibility Study Quality Relative to Cost

    The lowest-cost option is rarely the best value in feasibility consulting. Several indicators distinguish rigorous studies from template-driven work that may fail lender or agency review. Independence is foundational: the preparer must have no financial interest in loan approval, project success, construction, brokerage, or ownership. Studies prepared by parties affiliated with the borrower, the lender's loan production team, or the project's development team fail the independence test and will be rejected by SBA and USDA reviewers regardless of analytical quality.

    Data sourcing is the second critical differentiator. Professional studies rely on recognized third-party data platforms for market analysis rather than borrower-provided estimates or generic internet research. Demographic data from ESRI or equivalent providers, property market data from institutional CRE databases, traffic data from state DOT records, and industry benchmarks from recognized sources such as STR for hotels and NIC MAP for senior housing all carry evidentiary weight with credit committees. Studies that cite only the borrower's own projections without independent market validation are a leading cause of rejection.

    Financial modeling rigor separates adequate studies from exceptional ones. At minimum, a creditworthy study includes a 10-year pro forma built on the NOI waterfall methodology, DSCR calculations under base, downside, and stress scenarios, sensitivity analysis varying at least three key assumptions (revenue, vacancy or occupancy, and operating expenses) across plus or minus 10% to 20% ranges, and DCF analysis with clearly stated discount rate and terminal cap rate assumptions. Studies that project only a single base-case scenario without downside testing are insufficient for credit committee review. The depth of this modeling, not the page count, is what borrowers should evaluate when comparing proposals from feasibility consultants.

    Sources

    1. SBA Standard Operating Procedure 50 10 8, Effective June 1, 2025
    2. 13 CFR Section 120.882, Eligible Project Costs for 504 Loans
    3. USDA Rural Development, 7 CFR Part 5001, OneRD Guarantee Loan Initiative
    4. USDA Rural Development, 7 CFR Section 5001.304, Community Facilities Application Requirements
    5. LightBox CRE Market Snapshot, Average Commercial Appraisal Cost Q1 2024
    6. ASTM E1527-21, Standard Practice for Environmental Site Assessments
    7. SBA SOP 50 10 5(H), Information Notice 5000-1340, Appraiser Competency Requirements
    8. Area Development Magazine, Feasibility Studies: An Overview
    9. National Association of Certified Valuators and Analysts, Business Valuation Credential Standards
    10. Bureau of Labor Statistics, Consumer Expenditure Survey and CPI Data, 2024-2026

    Looking for a lender-grade industry guides feasibility study?

    RM

    Robert Mitchell, MAI, SRA, AI-GRS

    Certified commercial real estate appraiser with extensive experience in industry guides property valuations across the United States.

    View team credentials →
    Get Started Today

    Need to Know if Your Project Works?

    Tell us about your project and we'll send a clear proposal: scope, timeline, and fee.